Masthead Corporate Logo
Subscribe eNewsletter Magazines

Power Group Online Article

| Add RSS Feed

U.S. nuclear generation hits record level

The U.S. nuclear industry supplied a record 806.5 billion kWh of electricity in 2007. The largest increase came in Tennessee, with 4 billion kWh more nuclear-provided electricity in 2007 than in 2006, an increase of 16 percent, according to preliminary Energy Information Administration (EIA) data. National total nuclear generation was 2.4 percent higher than in 2006, and 2.3 percent higher than in the previous record year, 2004. The capacity factor for 2007 was 91.8 percent, exceeding the previous record capacity factor of 90.3 percent in 2002.

The total number of operating commercial nuclear reactors in the U.S. increased from 103 to 104 in 2007 with the return to service of the Brown's Ferry 1 reactor, which had been shut down in 1985. The total number of operating U.S. commercial reactors remains well below the peak level of 112 in 1990. However, nuclear power generation in 2007 was 40 percent above the 577 billion kWh produced in 1990, largely reflecting a major improvement in utilization rates.



Related Articles of Interest:

Nuclear Power 2020 (video)

Power Engineering Click Here to Subscribe to the Power Engineering E-Newsletter




| Add RSS Feed


 
Return to Previous Page

 
Power Engineering Webcasts




Save Time and Money with Safe Bolting
July 30, 2009






Integrating Fuel Flexibility into Boilers, Burners, Furnaces and Gas Turbines
July 28, 2009






Reduce Combustion Design Costs Through Accurate Chemistry Simulation
Original broadcast on
May 19, 2009



More

Sponsored White Papers Library
Recently Added White Papers

Using Advanced Simulation for Faster, Less Costly Lean Blow Off Analysis (05/29/2009, Reaction Design)

Simulating Fuel Flexibility and Combustion Performance (05/04/2009, Reaction Design)

Advanced Energy Solutions: Helping Industrial Power Generators Improve Efficiency and Reduce Emissions (04/08/2009, Honeywell)

Accurate Chemistry Simulation Enables Clean Combustion Design for Power Generation Systems (04/01/2009, Reaction Design)

How Automation Technology Can Improve Performance of Your Power Plant (08/25/2008, Honeywell)

More

 







 


Subscribe eNewsletter Magazines